Leo I bought it from Goldfox USA it cost about a $1000 bucks with shipping.. Note that you can only feed with a shovel if your dealing with large material and if you are dealing with sand best to use a small scooper cause the sand will blind your mattes and wash all your gold away and that's from experience
Hopper 11 1/2''x 11 1/2'' x6'' , over all machine length 26 1/2'', ......5''- 16 gauge -12'' barrel classing to 1/4'' , collection box 16'' x 6 3/4'' x 3''(under the barrel ), features multi adjust angle trommel base , motor drive adjust tension spring , 12 RPM barrel speed , 12 volt gear driven , 12 RPM, the bottom box is 36'' x 7'' x 3'' , a light weight leg attachment fixture with four corner adjustments , features gold hog matting in this order , UR ,SCRUBBER, RAZOR , DOWN DRAFT AND BEDROCK , water supply is 12 volt 1100 GPH , 3 ft of 1 1/8'' Flex hose , features a unique spray bar that runs inside of the barrel to spray the material while it tumbles as well as supplies water the hopper , a very cool unit . total weight is 30 lbs . complete unit ready to run (battery not included)